Home > Be Wary Of Winter’s Hold On Your Machinery
Be Wary Of Winter’s Hold On Your Machinery
Get a jump on winterizing your equipment so you don’t get left out in the cold. Take the proper precautions and your equipment will persist through the most frigid conditions.
Get Things Started
If your fleet sits in the cold all night your machinery will need time to get warmed up. Fluids need to circulate, and joints and hinges may need to be lubricated. Be proactive and perform regular inspections, especially during the winter.Check your fleet for:
- Ether Start System: At startup, in cold conditions, diesel engines require a controlled amount of ether to reduce rough combustion and high cylinder pressures. The lack of this assistance can result in broken piston rings, piston scuffing, and broken piston.
- Coolant System: Make sure you keep the radiator clean, belts and hoses in good condition, use water that meets the recommended specification, use proper antifreeze mix, add coolant conditioner on schedule, and take a coolant sample at each engine oil change interval.
- Good tire tread and pressure: Tread is needed as slippery conditions put your machines at risk of sliding. Cold weather also makes maintaining tire pressure more difficult, leading to lower fuel efficiency.
- Battery Charge: Your battery function is likely to be impacted by the cold. Regularly check the charge on batteries before start-up and watch out for any corrosion. Never attempt to jump start a frozen battery.
- Fluids and Lubricants: Fluids can thicken, clog filters, and strain hoses so check for leaks and build-up. Always top off your fuel tank to avoid moisture collecting and crystalizing in your tank as well.
Winter is the darkest time of year so optimizing visibility and knowing your surroundings is the best way to maintain on-site safety. Here are some things to keep in mind during operation.
- Defrosters, wipers, and lights: Good visibility is essential especially with shorter daylight hours. Keep your windows free of condensation and replace broken headlights immediately.
- Heaters: Heat will prevent muscles from stiffening and inhibiting operation, so check your heating systems before temperatures drop. This will ensure your operators have a comfortable work environment in the cab.
- Watch your site: Snow and ice can obscure your site and cover material that can damage tires. If your worksite is close to water, beware of hidden ice that will crack or cause your machinery to slide.
Shutting It Down
Ideally, equipment should be stored inside to protect it from the elements and keep fluids from solidifying. If that is not an option, there are measures you can take to protect your equipment outside.
- Park on raised surfaces: Your equipment can freeze to the ground if it’s left outside overnight in frigid temperatures. Park equipment on a raised surface like planks to prevent tire damage and ease start-up.
- Elevate attachments: Like tires, attachments can get stuck to the ground during winter. Raise them up or place them on planks to reduce strain on machinery joints.
Carter offers a $900 winter weather inspection package which includes system checks, fluid samples, and a battery test so your machinery won’t feel the deep freeze. To learn more or to schedule a winter inspection, contact your local product support representative or contact us online.