735 Articulated Truck
The Cat® 735 features a world-class cab design, re-engineered using global operator feedback to advance comfort and ease of operation. Enhancements include new controls, transmission-protection features, hoist-assist system, advanced automatic traction control system, stability-assist machine rollover warning system, and a fuel saving ECO mode.
Specifications
Equipment
Product Brochures
Attachments
Units:
Engine
Engine Model
Cat® C13
Bore
5.1 in
130 mm
Stroke
6.2 in
157 mm
Displacement
736 in³
12.5 l
Peak Engine Torque Net (SAE J1349)
1597 ft·lbf
2165 N·m
Peak Engine Torque Speed
1200 r/min
1200 r/min
Net Power - SAE J1349
424 hp
316 kW
Emissions
The 735 meets Tier 4 Final and Stage V emission standards.
Peak Engine Torque Gross (SAE J1995)
1614 ft·lbf
2188 N·m
Note (3)
The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
No Engine De-rating Below
12500 ft
3810 m
Note (2)
The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard.
Net Power - ISO 14396
429 hp
320 kW
Gross Power - SAE J1995
434 hp
324 kW
Note (5)
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.
Note (4)
Net power when the fan is at maximum speed is 254 kW (341 hp) per the SAE reference conditions.
Note (1)
The references to Tier 4 Final/Stage V include U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), and Korea Tier 4 Final emission standards.
Engine Model - U.S. EPA Tier 4 Final/EU Stage V
Cat C13
Weights
Rated Payload
35.3 ton (US)
32 t
Body Capacities
Heaped (SAE 2:1)
26.2 yd³
20 m³
Struck
20.3 yd³
15.5 m³
Tailgate Heaped SAE 2:1
27.9 yd³
21.3 m³
Tailgate Struck
21.3 yd³
16.3 m³
Transmission
Forward - 1
5 mile/h
8 km/h
Forward - 2
9 mile/h
15 km/h
Forward - 3
14 mile/h
23 km/h
Forward - 4
22 mile/h
35 km/h
Forward - 5
30 mile/h
48 km/h
Forward - 6
35 mile/h
57 km/h
Reverse - 1
6 mile/h
9 km/h
Sound Levels
Interior Cab
72 dB(A)
72 dB(A)
Operating Weights
Total - Loaded
126192 lb
57240 kg
Front Axle - Empty
34128 lb
15480 kg
Total - Rated Load
70548 lb
32000 kg
Rear Axle - Loaded
41270 lb
18720 kg
Rear Axle - Empty
10516 lb
4770 kg
Center Axle - Empty
11001 lb
4990 kg
Center Axle - Rated Load
30754 lb
13950 kg
Front Axle - Loaded
43166 lb
19580 kg
Total - Empty
55645 lb
25240 kg
Front Axle - Rated Load
9039 lb
4100 kg
Rear Axle - Rated Load
30754 lb
13950 kg
Center Axle - Loaded
41756 lb
18940 kg
Service Refill Capacities
Fuel Tank
108.8 gal (US)
412 l
Cooling System
21.9 gal (US)
83 l
Hydraulic System
29.1 gal (US)
110 l
Engine Crankcase
10 gal (US)
38 l
Transmission
12.3 gal (US)
56 l
Final Drives/Differential
33 gal (US)
125 l
Output Transfer Gear Box
5.5 gal (US)
25 l
DEF Tank
5.3 gal (US)
20 l
Body Hoist
Raise Time
12 s
12 s
Lower Time
11 s
11 s
Steering
Lock to Lock
4.75 seconds @ 60 rpm
Standards
Brakes
ISO 3450 – 2011
Cab - FOPS
ISO 3449 Level II – 2005
Cab - ROPS
ISO 3471 – 2008
Steering
ISO 5010 – 2007
Body Plate
Type
High strength Brinell HB450 wear resistant steel
Turning Circle
Turning Dimensions - SAE Turning Radius
294 in
7470 mm
Turning Dimensions - Inside Radius
149 in
3793 mm
Turning Dimensions - Clearance Radius
318 in
8075 mm
Note
Dimensions are for machines equipped with 750/65 R25 tires.
Turning Dimensions - Steer Angle - Left/Right
45°
Turning Dimensions - Aisle Width
212 in
5393 mm
Sound Levels
Note (2)
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
Note (1)
The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.
Optimal Loader/Truck Pass Matching
Hydraulic Excavators: 336F/336F XE - Passes
5–6
Note
An optimum system match gives you a major productivity advantage. The 735 is an excellent match for the Cat 349F and 336F Hydraulic Excavators; and Cat 972M, 966M, 962M and 950M Wheel Loaders. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.
Body Plate Thickness
Base Plate
0.51 in
13 mm
Optimal Loader/Truck Pass Matching
Hydraulic Excavators: 349F/349F XE - Passes
4–5
Wheel Loaders: 972M/972M XE - Passes
3–4
Body Plate Thickness
Front Plate
0.28 in
7 mm
Optimal Loader/Truck Pass Matching
Wheel Loader: 962M - Passes
4–5
Wheel Loader: 950M - Passes
5
Body Plate Thickness
Side Plates
0.43 in
11 mm
Optimal Loader/Truck Pass Matching
Wheel Loaders: 966M/966M XE - Passes
4
Standard Equipment
NOTE
OPERATOR ENVIRONMENT
CAT TECHNOLOGIES
ELECTRICAL AND LIGHTING
POWER TRAIN
SAFETY
GUARDS
OTHER STANDARD EQUIPMENT
