826 Landfill Compactor
Purpose-built for landfill operation, the Cat 826 delivers a level of reliability, performance, safety, operator comfort, serviceability, and efficiency that can only come from 45-plus years as an industry leader. Field-proven protection and integrated technologies provide peak availability and optimized landfill performance.
Specifications
Equipment
Product Brochures
Attachments
Units:
Engine
Gross Power - SAE J1995:2014
435 hp
324 kW
Net Power - SAE J1349:2011
405 hp
302 kW
Net Power – ISO 9249:2007
405 hp
302 kW
Engine Power - ISO 14396:2002
426 hp
318 kW
Engine Model
C15 Cat®
Emissions
U.S. EPA Tier 4 Final/ EU Stage V/Korea Stage V and Japan 2014 or Brazil MAR-1, emitting equivalent to U.S. EPA Tier 3/EU Stage IIIA
Rated Speed
1800
Peak Torque (1,300 rpm)
1479 lbf·ft
2005 N·m
Torque Rise
33%
Bore
5.4 in
137.2 mm
Stroke
6.7 in
171.4 mm
Displacement
927.6 in³
15.2 l
High Idle Speed
2300 r/min
2300 r/min
Low Idle Speed
800 r/min
800 r/min
Maximum Altitude – Without Derating (Tier 4 Final/Stage V)
9298 ft
2834 m
Maximum Altitude - Without Derating (Tier 3/Stage IIIA)
9098 ft
2773 m
Note
Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.
Operating Specifications
Operating Weight (Tier 4 Final/Stage V)
90207 lb
40917 kg
Operating Weight (Tier 3/Stage IIIA equivalent)
89186 lb
40454 kg
Maximum Operating Weight (Tier 4 Final/Stage V)
92568 lb
41988 kg
Maximum Operating Weight (Tier 3/Stage IIIA equivalent)
91549 lb
41526 kg
Transmission
Transmission Type
Planetary - Powershift - ECPC
Direct Drive - Forward 1
4.2 mile/h
6.8 km/h
Direct Drive - Forward 2
7.5 mile/h
12.1 km/h
Direct Drive - Reverse 1
4.3 mile/h
7.8 km/h
Direct Drive - Reverse 2
8.6 mile/h
13.8 km/h
Hydraulic System
Pump Flow at 1800 rpm
30.9 gal/min
117 l/min
Main Relief Pressure
3771 psi
26000 kPa
Maximum Supply Pressure
3495 psi
24100 kPa
Lift System
Double Acting Cylinder
Bore
4.7 in
120 mm
Stroke
42.1 in
1070 mm
Service Refill Capacities
Cooling System
30.6 gal (US)
116 l
Engine Crankcase
9 gal (US)
34 l
Transmission
17.4 gal (US)
66 l
Fuel Tank
206.6 gal (US)
782 l
Diesel Exhaust Fluid Tank (Tier 4 Final/Stage V)
8.5 gal (US)
32 l
Differential - Final Drives - Front
26.4 gal (US)
100 l
Differential - Final Drives - Rear
29.1 gal (US)
110 l
Hydraulic Tank Only
35.4 gal (US)
134 l
Note
All nonroad Tier 4 Final and Stage V diesel engines are required to use: – Ultra low sulfur diesel (ULSD) fuels containing 15 ppm (mg kg) sulfur or less. Biodiesel blends up to B20 are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD and when the biodiesel feedstock meets ASTM D7467 specifications.– Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specifications are required.– Diesel exhaust fluid (DEF) that meets all requirements defined in ISO 22241-1:2006.
Axles
Front
Planetary - Fixed
Rear
Planetary - Oscillating
Oscillation Angle
±5°
Braking System
Service Brakes
Multi Disc Wet (Enclosed) 2 WHL
Parking Brake
Drum and Shoe, Spring Applied, Hydraulic Released
Sound Performance - Tier 4 Final/EU Stage V
Operator Sound Level (ISO 6396:2008) - Standard
73 dB(A)
73 dB(A)
Machine Sound Level (ISO 6395:2008) - Standard
113 dB(A)
113 dB(A)
Operator Sound Level (ISO 6396:2008) - Suppression
72 dB(A)
72 dB(A)
Machine Sound Level (ISO 6395:2008) - Suppression
110 dB(A)
110 dB(A)
Note (1)
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (2)
The machine sound power level was measured according to the test ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (3)
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.
Sound Performance - Tier 3 / Stage IIIA
Operator Sound Level (ISO 6396:2008) - Standard
73 dB(A)
73 dB(A)
Machine Sound Level (ISO 6395:2008) - Standard
113 dB(A)
113 dB(A)
Operator Sound Level (ISO 6396:2008) - Suppression
72 dB(A)
72 dB(A)
Machine Sound Level (ISO 6395:2008) - Suppression
110 dB(A)
110 dB(A)
Note (1)
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (2)
The machine sound power level was measured according to the test ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (3)
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.
Hydraulic System - Steering
Steering System - Circuit
Double Acting - End Mounted
Bore
4.5 in
114.3 mm
Stroke
22.7 in
576 mm
Steering System - Pump
Piston - Variable Displacement
Maximum System Flow
170 L/min @ 1,800 rpm (44.9 gal/min @ 1,800 rpm)
Steering Pressure Limited
3481 psi
24000 kPa
Vehicle Articulation Angle
86 °
86 °
Dimensions (Approximate)
Height to Top of Air Conditioning Condenser
14.99 ft
4568 mm
Height - Cab Roof
13.75 ft
4193 mm
Height - Top of Beacon
15.63 ft
4765 mm
Height - Top of Exhaust Pipe
14.56 ft
4439 mm
Height - Top of Hood
10.87 ft
3312 mm
Ground Clearance - Bumper
3.15 ft
960 mm
Centerline of Rear Axle to Edge of Counterweight - No Rear Radiator Guard
9.38 ft
2860 mm
Centerline of Rear Axle to Edge of Counterweight - Including Rear Radiator Guard
10.16 ft
3096 mm
Hitch to Centerline of Front Axle
6.07 ft
1850 mm
Wheel Base
12.14 ft
3700 mm
Length - With Blade on Ground - Straight Blade - Including Rear Radiator Guard
28.59 ft
8715 mm
Ground Clearance
2.11 ft
642 mm
Width - Over Wheels
12.47 ft
3800 mm
Turning Radius - Inside of Wheels
9.18 ft
2797 mm
Straight Blade
Width – Moldboard Length
14.16 ft
4311 mm
Width - Over End Bits
14.75 ft
4502 mm
Height with Cutting Edge and Screen
6.23 ft
1900 mm
Maximum Depth of Cut
1.5 ft
461 mm
Maximum Lift above Ground
4.19 ft
1277 mm
Capacity, Rated
16.1 yd³
12.3 m³
Overall Machine Length (includes rear radiator guard, measured to cutting edge)
28.59 ft
8715 mm
Semi U-Blade
Width – Moldboard Length
14.66 ft
4462 mm
Width - Over End Bits
14.83 ft
4522 mm
Height with Cutting Edge and Screen
6.63 ft
2022 mm
Maximum Depth of Cut
2.03 ft
619 mm
Maximum Lift above Ground
3.825 ft
1165 mm
Capacity, Rated
20.9 yd³
16 m³
Overall Machine Length (includes rear radiator guard, measured to cutting edge)
29.54 ft
9005 mm
U-Blade
Width – Moldboard Length
14.25 ft
4331 mm
Width - Over End Bits
14.41 ft
4398 mm
Height with Cutting Edge and Screen
6.62 ft
2019 mm
Maximum Depth of Cut
2.03 mm
619 mm
Maximum Lift above Ground
3.79 ft
1156 mm
Capacity, Rated
22.9 yd³
17.5 m³
Overall Machine Length (includes rear radiator guard, measured to cutting edge)
30.7 ft
9357 mm
Wheels
Combination Tips (Weight Group)
21125 lb
9582 kg
Plus Tips - Weight (Group)
22002 lb
9980 kg
Paddle Tips - Weight (Group)
20540 lb
9317 kg
Diamond Tips Weight (Group)
23997 lb
10885 kg
Outside Diameter
77.6 in
1971 mm
Outside Diameter - Diamond
78.1 in
1983 mm
Drum Diameter
63.4 in
1610 mm
Drum Width
47.2 in
1200 mm
Feet Per Row
6
Feet Per Wheel
30
Replaceable
Weld On
Width Over Drums
3800 mm
149.6 in
Tip Height
179 mm
7 in
Tip Height - Diamond
7.25 in
179 mm
Standard Equipment
NOTE
POWER TRAIN
ELECTRICAL
OPERATOR ENVIRONMENT
GUARDS
FLUIDS
OTHER STANDARD EQUIPMENT
TECHNOLOGY PRODUCTS
SPECIAL ARRANGEMENTS
BLADES
WHEELS AND CLEANER BARS