Cat C32 ACERT Generator Set (IMO II)
C32 ACERT generator sets incorporate a separate circuit aftercooling system (SCAC) for all configurations. The primary advantage of the SCAC systsem is reduced aftercooler corrosion since no sea water circulates through the aftercooler. Many other improvements on these engines contribute to minimizing owning and operating costs. The IMO II and EU Stage IIIA compliant ratings are available with heat exchanger or keel cooled options. Heat exchanger configurations have an optional front mounted sea water pump.
Specifications
Equipment
Units:
Generator Set Specifications
Minimum Rating
550 eKW (688 kVA)
Maximum Rating
940 ekW (1175 kVA)
Frequency
50 Hz or 60 Hz
Speed
1500 rpm (50 hz) or 1800 rpm (60 hz)
Engine Specifications
Aspiration
Twin Turbocharged-Aftercooled
Bore
5.7 in
145 mm
Stroke
6.4 in
162 mm
Displacement
1959 in³
32.1 l
Governor Type
Electronic
Fuel System
Diesel
Engine Model
Vee 12, 4-Stroke-Cycle Diesel
Generator Set Specifications
Emissions/Fuel Strategy
IMO II
Generator Set Dimensions
Length
168.34 in
4275.9 mm
Width
65.79 in
1671.1 mm
Height
70.86 in
1800 mm
Weight - Estimated
15721 lb
7131 kg
Generator Specifications
Excitation
permanent magnet (PMG)
Pitch
2/3
Number of Poles
4
Number of Bearings
2 roller bearings
Number of Leads
6
Insulation
Class H
Voltage Regulation
± 0.5% (steady state)
Frame Size
1423, 1467
IP Rating
Drip Proof IP 23*
Alignment
Closed-coupled adapter
Wave Form Deviation - Line to Line
< 3.0%
Voltage Regulator
Cat® Digital Voltage Regulator (CDVR)
Telephone Influence Factor (TIF)
< 50
Standard Equipment
AIR INLET SYSTEM
CONTROL SYSTEM
COOLING SYSTEM
EXHAUST SYSTEM
FLYWHEELS & FLYWHEEL HOUSINGS
FUEL SYSTEM
GENERATORS AND GENERATOR ATTACHMENTS
LUBE SYSTEM
MOUNTING SYSTEM
GENERAL