Cat C32 ACERT Generator Set (EPA Tier 3)
C32 ACERT generator sets incorporate a separate circuit aftercooling system (SCAC) for all configurations. The primary advantage of the SCAC systsem is reduced aftercooler corrosion since no sea water circulates through the aftercooler. Many other improvements on these engines contribute to minimizing owning and operating costs. The EPA Tier 3, IMO II, EU Stage IIIA compliant ratings are available with heat exchanger or keel cooled options. Heat exchanger configurations have an optional front mounted sea water pump.
Specifications
Equipment
Units:
Generator Set Specifications
Minimum Rating
730 ekW (913 kVA)
Maximum Rating
940 ekW (1175 kVA)
Frequency
60hz
Speed
1800 rpm
Engine Specifications
Aspiration
Turbocharged and aftercooled
Bore
5.7 in
145 mm
Stroke
6.38 in
162 mm
Displacement
1959 in³
32.1 l
Governor Type
Electronic
Fuel System
MEUI
Engine Model
Vee-12, 4-stroke-Cycle-Diesel
Generator Set Specifications
Emissions/Fuel Strategy
EPA Tier III
Generator Set Dimensions
Width
60.2 in
1528 mm
Height
65.6 in
1667 mm
Weight - Estimated
15721 lb
7131 kg
Length
162.8 in/4271 mm (minimum), 175.3 in/4452 mm (maximum)
Generator Specifications
Excitation
Permanent magnet
Number of Poles
4
Number of Bearings
2 roller bearings
Number of Leads
6
Insulation
Class H
IP Rating
23
Voltage Regulator
CDVR
Standard Equipment
AIR INLET SYSTEM
CONTROL SYSTEM
COOLING SYSTEM
EXHAUST SYSTEM
FLYWHEELS & FLYWHEEL HOUSINGS
FUEL SYSTEM
GENERATORS AND GENERATOR ATTACHMENTS
LUBE SYSTEM
MOUNTING SYSTEM
GENERAL