775 Off-Highway Truck
Having a solid track record in the quarry and aggregates industry, Cat’s 775 has been designed and manufactured using the latest quality control technologies—both virtually and hands on—to ensure your Off-Highway Truck is ready to do work. Built with a Cat C27 diesel engine, the 775 has improved fuel efficiency and delivers an additional 5% horsepower. Our 775 is a great pass match for the Cat 988K or 990K Wheel Loader, too. By having the Cat Off-Highway Trucks in your haul fleets, you can be more productive, spend less time on maintenance, and support the environment with new levels of eco performance. Which ultimately allows you to make a positive impact within your business and community every day.
Specifications
Equipment
Product Brochures
Attachments
Units:
Engine
Engine Model
Cat® C27
Rated Engine Speed
1800 r/min
1800 r/min
Gross Power - SAE J1995
825 HP
615 kW
Net Power - SAE J1349
768 HP
572 kW
Net Power - 80/1269/EEC
775 HP
578 kW
Net Power - ISO 9249
775 HP
578 kW
Bore
5.4 in
137 mm
Stroke
6 in
152 mm
Displacement
1648 in³
27 l
Engine Power - ISO 14396
812 HP
605.2 kW
Note (2)
Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F).
Net Torque
3148 ft-lb
4269 N·m
Peak Torque - Speed
1200 r/min
1200 r/min
Note (1)
Power rating applies at 2,000 rpm when tested under the specified condition for the specified standard.
Note (3)
No engine derating required up to 3810 m (12,500 ft) for Tier 2 Equivalent.
Emissions
Meets EU Stage V emission standards.
Weights - Approximate
Maximum Gross Vehicle Weight
246503 lb
111812 kg
Operating Specifications
Nominal Payload Class (100%)
70.5 ton (US)
64 t
Top Speed - Loaded
41.6 mile/h
66.9 km/h
Maximum Working Payload (110%)
77.5 ton (US)
70.3 t
Target Payload (100%)
70.5 ton (US)
64 t
Maximum Allowable Payload (120%)*
84.6 ton (US)
76.7 t
Note (2)
* Refer to the Caterpillar 10/10/20 Payload Policy for maximum gross machine weight limitations.
Note (1)
Capacity with Dual Slope body – no liner.
Body Capacity - SAE 2:1
55.23 yd³
42.23 m³
Transmission
Forward - 1
6.6 mile/h
10.6 km/h
Forward - 2
9.3 mile/h
15 km/h
Forward - 3
12.6 mile/h
20.3 km/h
Forward - 4
16.8 mile/h
27 km/h
Forward - 5
22.8 mile/h
36.7 km/h
Forward - 6
30.7 mile/h
49.4 km/h
Forward - 7
41.6 mile/h
66.9 km/h
Reverse
8.7 mile/h
14 km/h
Note
Maximum travel speeds with standard 24.00R35 (E4) tires.
Final Drives
Differential Ratio
3.64:1
Planetary Ratio
4.80:1
Total Reduction Ratio
17.49:1
Brakes
Brake Surface - Front
257 in²
655 cm²
Brake Surface - Rear
9497 in²
61269 cm²
Brake Standards
ISO 3450:2011
Body Hoists
Pump Flow - High Idle
118 gal/min
448 l/min
Relief Valve Setting - Raise
2502 psi
17250 kPa
Relief Valve Setting - Lower
500 psi
3450 kPa
Body Raise Time - High Idle
10 s
10 s
Body Lower Time - Float
14 s
14 s
Body Power Down - High Idle
14 s
14 s
Capacity - Dual Slope - 100% Fill Factor
Struck
42.7 yd³
32.6 m³
Heaped (SAE 2:1)*
55.5 yd³
42.2 m³
Note (1)
Contact your local Cat dealer for body recommendation.
Note (2)
*ISO 6483:1980
Capacity - Flat Floor - 100% Fill Factor
Struck
42.2 yd³
32.3 m³
Heaped (SAE 2:1)*
55.2 yd³
42.2 m³
Note (1)
Contact your local Cat dealer for body recommendation.
Note (2)
*ISO 6483:1980
Weight Distributions - Approximate
Front Axle - Empty
50 %
50 %
Front Axle - Loaded
34 %
34 %
Rear Axle - Empty
50 %
50 %
Rear Axle - Loaded
66 %
66 %
Suspension
Empty Loaded Cylinder Stroke Front
9.2 in
234 mm
Rear axle - Oscillation
8.1°
Empty Loaded Cylinder Stroke Rear
5.8 in
149 mm
Service Refill Capacities
Fuel Tank
210 gal (US)
795 l
Cooling System
45 gal (US)
171 l
Differential - Final Drives
38 gal (US)
145 l
Steering Tank
9.5 gal (US)
36 l
Steering System - Including Tank
14 gal (US)
54 l
Brake Hoist System
85 gal (US)
322 l
Torque Converter - Transmission System - LRC
16 gal (US)
61 l
Crankcase
24 gal (US)
90 l
Brake/Hoist Hydraulic Tank
46.5 gal (US)
176 l
Torque Converter - Transmission System - HRC
18 gal (US)
70 l
Tires
Note (2)
Caterpillar recommends the customer evaluate all job conditions and consult the tire manufacturer for proper tire selection.
Note (1)
Productive capabilities of the 775G truck are such that, under certain job conditions, TKPH (TMPH) capabilities of standard or optional tires could be exceeded and, therefore, limit production.
Standard Tire
24.00R35 (E4)
ROPS
FOPS Standards
Falling Objects Protective Structure (FOPS) meets ISO 3449:2005 Level II FOPS criteria.
ROPS Standards
Rollover Protective Structure (ROPS) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria.
Sound
Sound Standards (1)
The operator Equivalent Sound Pressure Level (Leq) is 76 dB(A) when SAE J1166 FEB2008 is used to measure the value for an enclosed cab. This is a work cycle sound exposure level. The cab was properly installed and maintained. The test was conducted with the cab doors and the cab windows closed.
Sound Standards (2)
The exterior sound pressure level for the standard machine measured at a distance of 15 m (49 ft) according to the test procedures specified in SAE J88:2008, mid‑gear moving operation is 86 dB(A).
Sound Standards (3)
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.
Steering
Turning Diameter - Front
77.1 ft
23.5 m
Steering Standards
ISO 5010:2007
Steer Angle
31 °
31 °
Turning Circle - Clearance Diameter
85.6 ft
26.1 m
Sustainability
Recyclability
98%
Standard Equipment
NOTE
POWER TRAIN
SUSPENSION SYSTEMS
ELECTRICAL
TECHNOLOGY PRODUCTS
OPERATOR ENVIRONMENT
GUARDS
FLUIDS
OTHER STANDARD EQUIPMENT
