272D3 XE Skid Steer Loader
The Cat® 272D3 XE Skid Steer Loader, with its powerful engine, high output hydraulic system, high lift forces and vertical lift design, provides the maximum performance for work tool productivity, digging, truck loading and material handling.
Specifications
Equipment
Product Brochures
Attachments
Units:
Engine
Gross Power - SAE J1995
110 hp
82 kW
Operating Specifications
Rated Operating Capacity
3700 lb
1680 kg
Weights
Operating Weight
9573 lb
4342 kg
Dimensions
Wheel Base
54.6 in
1386 mm
Height - Top of Cab
84 in
2133 mm
Vehicle Width over Tires
76 in
1930 mm
Ground Clearance
10.4 in
263 mm
Departure Angle
28°
Maximum Dump Angle
51°
Bumper Overhang - Behind Rear Axle
46.2 in
1175 mm
Turning Radius from Center - Machine Rear
74.7 in
1899 mm
Length - Without Bucket
127 in
3226 mm
Reach - Maximum Lift/Dump
29 in
736 mm
Clearance at Maximum Lift and Dump
97.4 in
2474 mm
Bucket Pin Height - Maximum Lift
128.6 in
3265 mm
Bucket Pin Height - Carry Position
9.3 in
235 mm
Turning Radius from Center - Coupler
57.7 in
1466 mm
Bucket Pin Reach - Maximum Lift
13.5 in
344 mm
Rack Back Angle - Maximum Height
84°
Maximum Overall Height
161.5 in
4103 mm
Length - With Bucket on Ground
155 in
3937 mm
Maximum Reach - With Arms Parallel to Ground
49.1 in
1246 mm
Turning Radius from Center - Bucket (racked)
90.6 in
2301 mm
Hydraulic System
Standard Flow Mode - Loader Hydraulic Pressure
3335 psi
23000 kPa
Standard Flow Mode - Hydraulic Power - Calculated
44 hp
33 kW
Standard Flow Mode - Loader Hydraulic Flow
23 gal/min
86 l/min
Note
*When equipped with Cat 400 Series work tools.
Hydraulic Flow - XE - Maximum Loader Hydraulic Pressure
4061 psi
28000 kPa
Hydraulic Flow - XE - Maximum Loader Hydraulic Flow*
40 gal/min
150 l/min
Hydraulic Flow - XE - Hydraulic Power (calculated)
94 hp
70 kW
Cab
ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level I
Power Train
Travel Speed - Forward or Reverse - One Speed
7.2 mile/h
11.6 km/h
Travel Speed - Forward or Reverse - Two Speed
10.3 mile/h
16.6 km/h
Service Refill Capacities
Cooling System
4.1 gal (US)
16 l
Engine Crankcase
3.5 gal (US)
13 l
Fuel Tank
31.7 gal (US)
120 l
Hydraulic System
14.5 gal (US)
55 l
Hydraulic Tank
10.3 gal (US)
39 l
Chain Box - Each Side
2.7 gal (US)
10.2 l
Air Conditioning System (if equipped)
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
Engine
Net Power - SAE 1349
106 hp
79 kW
Displacement
232 in³
3.8 l
Stroke
4.7 in
120 mm
Bore
3.9 in
100 mm
Net Flywheel Power
106 hp
79 kW
Engine Model
Cat C3.8 DIT (turbo)
Net Power - ISO 9249
107 hp
80 kW
Peak Torque - 1,500 rpm - SAE J1995
276 ft·lbf
374 N·m
Operating Specifications
Tipping Load
7400 lb
3365 kg
Breakout Force - Tilt Cylinder
7362 lb
3339 kg
Breakout Force - Lift Cylinder
6085 lb
2760 kg
Noise Level
Note (2)
**The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Operating Specifications
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA battery, dual direction self level, 2036 mm (80 in) low profile bucket, no optional counterweights, Cat PC 14 × 17.5 tires and manual quick coupler (unless otherwise noted).
Service Refill Capacities
Diesel Exhaust Fluid (DEF) Tank
5 gal (US)
19 l
Weights
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA battery, dual direction self level, 2036 mm (80 in) low profile bucket, no optional counterweights, Cat PC 14 × 17.5 tires and manual quick coupler (unless otherwise noted).
Dimensions
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA battery, dual direction self level, 2036 mm (80 in) low profile bucket, no optional counterweights, Cat PC 14 × 17.5 tires and manual quick coupler (unless otherwise noted).
Noise Level
Outside Cab***
104 dB(A)
104 dB(A)
Inside Cab**
83 dB(A)
83 dB(A)
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Operating Specifications
Rated Operating Capacity with Optional Counterweight
3950 lb
1795 kg
Noise Level
Note (3)
***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Dimensions
Roll Back Angle
28°
Standard Equipment
ELECTRICAL
OPERATOR ENVIRONMENT
POWER TRAIN
OTHER
MANDATORY EQUIPMENT
Brochures
