TL642 Telehandler
The TL642 is precision engineered to handle any task, offering stability, maneuverability, speed and power in any application.
Specifications
Equipment
Units:
Engine
Engine Model
Cat® C3.6L
Gross Power - Basic
73.7 hp
55 kW
Note
Meets U.S. EPA Tier 4 Final emission standards.
Weights
Operating Weight
22002 lb
9980 kg
Operating Specifications
Rated Load Capacity
6500 lb
2948 kg
Maximum Lift Height
42 ft
12.8 m
Maximum Forward Reach
30 ft
9.1 m
Top Travel Speed
19 mile/h
31 km/h
Drawbar Pull - Loaded
20670 lbf
92 kN
Turning Radius - Over Tires
12 ft
3.7 m
Frame Leveling
10°
Capacity at Maximum Height
6500 lb
2949 kg
Capacity at Maximum Reach
700 lb
317 kg
Dimensions
Height
8 ft
2430 mm
Width
8 ft
2470 mm
Wheel Base
11.25 ft
3430 mm
Length - Fork Face
18.5 ft
5639 mm
Ground Clearance
17 in
432 mm
Turning Radius - Over Tires
12 ft
3658 mm
Tires
Standard
370/75-28 Duraforce Air
Optional (1)
370/75-28 Duraforce Foam Fill
Optional (2)
315/95-28 Telemaster Solid
Optional (3)
13.00-24 16PR Air
Optional (4)
13.00-24 12PR Foam
Optional (5)
370/75-28 Non-Marking Air
Optional
370/75-28 Non-Marking Foam
Hydraulic System
Gear Pump
Single-section
Service Refill Capacities
Fuel Tank
38.3 gal (US)
145 l
Hydraulic System
42 gal (US)
158 l
Boom Performance
Boom Up
15 s
15 s
Boom Down
10.3 s
10.3 s
Tele In
9.5 s
9.5 s
Tele Out
16.3 s
16.3 s
Braking System
Parking Brakes
Wet disc, spring applied hydraulic release on front axle
Service Brakes
Inboard wet disc brakes on front and rear axles
Axles
Type (1)
Trunnion mounted planetary 55 degree steer axles.
Hydraulic System
Auxiliary Hydraulic Pressure
3481 psi
240 bar
Auxiliary Hydraulic Flow
18 gal/min
68 l/min
Work Tools
Carriages - Dual Fork Positioning
50 in
1270 mm
Pallet Forks - Option 2
[2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in)
Pallet Forks - Option 3
[2] 1829 mm, 60 mm × 150 mm ([2] 72 in, 2.36 in × 6 in)
Pallet Forks - Option 1
[2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in)
Cubing Forks
[2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in)
Carriages - Standard Tilt
50 in
1270 mm
Transmission Speeds
Forward
4 speed
Reverse
3 speed
Work Tools
Carriages - Side Shift
50 in
1270 mm
Carriages - Swing
100°, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung)
Lumber Forks - Option 1
[2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in)
Axles
Type (2)
High bias limited slip differential on front axle.
Standard Equipment
TELESCOPIC BOOM
ELECTRICAL
OPERATOR STATION
POWER TRAIN
STRUCTURE
ANTI-FREEZE
TIRES
OTHER EQUIPMENT