910 Compact Wheel Loader
The Cat® 910 Compact Wheel Loader features a C3.6 engine, the Cat Optimized Z-bar Loader linkage, various work tools, a state-of-the-art electro-hydraulic system, a tuned drivetrain, a cab with all-around visibility, extended service intervals and excellent service access, and standard fuel savings features.
Specifications
Product Brochures
Attachments
Units:
Engine
Rated Net Power - Rated Engine Speed
2200 r/min
2200 r/min
Maximum Gross Power - Rated Engine Speed
1800 r/min
1800 r/min
Rated Net Power - SAE J1349
99 hp
74 kW
Maximum Gross Power - ISO 14396 (metric)
112 hp
112 hp
Rated Net Power - ISO 9249
98 hp
73 kW
Maximum Gross Torque - SAE J1995
335 ft·lbf
454 N·m
Maximum Gross Torque - ISO 14396
332 ft·lbf
450 N·m
Maximum Net Torque - SAE J1349
329 ft·lbf
446 N·m
Maximum Net Torque - ISO 9249
327 ft·lbf
443 N·m
Displacement
220 in³
3.6 l
Bore
3.85 in
98 mm
Stroke
4.72 in
120 mm
Engine Model
Cat C3.6
Emissions
Engine meets Tier 4 Final/Stage V emission standards.
Note
Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Maximum Gross Power - ISO 14396
110 hp
82 kW
Buckets
Bucket Capacities
1.3-3.5 m3 (1.7-4.6 yd3)
Bucket Capacities - General Purpose
1.3-1.9 m³ (1.7-2.5 yd³)
Bucket Capacities - Light Material
2.5-3.5 m³ (3.3-4.6 yd³)
Weights
Operating Weight
18102 lb
8109 kg
Steering
Maximum Working Pressure - Steering Pump
2683 psi
18500 kPa
Steering Articulation Angle - Each Direction
40 °
40 °
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed
3.2 s
3.2 s
Maximum Flow - Steering Pump
17 gal/min
66 l/min
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
3.75 turns
3.75 turns
Loader Hydraulic System
Hydraulic Cycle Time - Dump, at Maximum Reach
1.4 s
1.4 s
Hydraulic Cycle Time - Total Cycle Time
12.5 s
12.5 s
Maximum Working Pressure - Implement Pump
3408 psi
23500 kPa
Relief Pressure - Tilt Cylinder
4931 psi
34000 kPa
Hydraulic Cycle Time - Rackback
2.2 s
2.2 s
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure
3046 psi
21000 kPa
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift
5.2 s
5.2 s
Maximum Flow - Implement Pump
32 gal/min
122 l/min
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure
3046 psi
21000 kPa
Maximum Flow - Implement Pump - 4th Function, Maximum Flow
24 gal/min
90 l/min
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow
24 gal/min
90 l/min
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level
3.7 s
3.7 s
Service Refill Capacities
Cooling System
5.7 gal (US)
21.5 l
Fuel Tank
43.6 gal (US)
165 l
Hydraulic System - Including Tank
25.9 gal (US)
98 l
Hydraulic Tank
14.5 gal (US)
55 l
Transmission
0.8 gal (US)
3.2 l
Note
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Axles - Front Center Differential
2 gal (US)
7.5 l
Axles - Rear Center Differential
2 gal (US)
7.5 l
Engine Crankcase
2.6 gal (US)
10 l
Diesel Exhaust Fluid (DEF) Tank
4.8 gal (US)
18 l
Transmission
Note
*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Forward and Reverse - Speed Range 3
25 mile/h
40 km/h
Forward and Reverse - Speed Range 2*
12.5 mile/h
20 km/h
Forward and Reverse - Speed Range 1*
6.3 mile/h
10 km/h
Tires
Note (2)
In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
Standard Size
15.5 R25 L2 XTLA
Other Choices Include
17.5 R25 L2 XTLA; 15.5 R25 L3 XHA2; 17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow
Note (3)
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note (1)
Other tire choices are available. Contact your Cat dealer for details.
Cab
ROPS
ISO 3471:2008
FOPS
ISO 3449:2005
Note (2)
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
Note (3)
The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (4)
*The measurements were conducted with the cab doors and windows closed.
Axles
Front
Fixed; Locking differential (standard)
Rear
Oscillating ±11 degrees; Locking differential (Standard)
Sustainability
Recyclability
95%
Engine
Maximum Gross Power
110 hp
82 kW
